Customer's Experience with High Performance Clear Wood Grain Filler on a Guitar

Take a look at one of Aqua Coat's customers who use the High Performance Clear Wood Grain Filler on their guitars.  

"I was amazed at how easy this product is to apply and work with. I used latex gloves and rubbed it into the grain followed by scraping the excess off with the direction of the grain. You can easily see the spots you missed and just go back over it the same way until the pores are filled. You can also tint this product with TransTint dyes or other similar dies to make the grain pop. I did two applications out of good measure on the mahogany guitar body and neck, but I really believe it was level after just 1. Not only that, it sands so easily and dries really fast! Not too fast though, but just fast enough to get on with the job and not waste any time. And best of all, it is low odor and low VOC!!!! Highly recommend it!"

Thank you David for sharing your pictures with us.  The High Performance Clear Wood Grain Filler is a favorite among luthiers.  We would love hear about and see your results also.  Please send them to sales@aquacoat.com. 

   

Please note, comments must be approved before they are published

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.