Aqua Coat, Best Wood Grain Filler. Clear Gel, Water Based, Low odor, Fast Drying, Non Toxic, Environmentally Friendly (Pint)
Designed with everyone in mind: From the DIYer to the contractor this is the perfect product to fill the grain and seal the pores of wood before or after staining or on raw wood to get a smooth finish on oak, ash, mahogany, walnut and other porous woods. A favorite product for tabletops, desktops, cabinets, vanities, millwork, pianos, guitars and furniture refinishing. For that glass smooth finish, start and finish all your hard to fill wood projects with Aqua Coat.Waterborne and Eco-Friendly: Our entire line of products are Made in the USA, low VOC, low odor, non-flammable, non-combustible, water-based fast drying, easy to apply, easy sanding, excellent adhesion, water clean up, environmentally friendly. This makes it the healthier option for your employees and your family. Achieve that beautiful glass smooth finish while keeping the environment and your health in mind.
Versatile and Compatible with Other Products: Filling your wood grain before you stain not only creates that beautiful smooth finish you are looking to achieve it will also seal the pores and help minimize absorption of your top coat, saving you time and money. Aqua Coat Clear Grain Filler can be mixed with water soluble pigments/dyes.
Easy to Use: Work the Clear Grain Filler generously into open wood grain and pores against the grain with a small squeegee, bondo blade, old credit card, or fingers with a glove. Scrape off excess with a squeegee, bondo blade, or an old credit card with the grain. Let dry 45-60 minutes. very lightly sand with a 320 or higher grit sandpaper or a fine scotchbrite sanding pad immediately before your next application of grain filler. 2-3 coats are recommended.
Long Lasting: A little goes a long way. You can use one quart to do 2 quarts on a medium sized kitchen (30-40) drawers and doors. Water Based Good Grain Filler in A Clear Jell from Aqua Coat