Directions For Use Aqua Tone Stain

SURFACE PREPARATION: Surface must be clean and dry (free from all dirt, oil, wax, and polish). Nails and screws should be countersunk and filled with Aqua-Coat Wood Putty. Sand the surface thoroughly with fine sandpaper and remove dust with vacuum or damp cloth (water).

DIRECTIONS FOR USE: Mix well prior to use. DO NOT shake. Staining is recommended before spray application.

READY TO USE: Can be thinned up to 50% with Aqua-Tone clear stain base if desired. Dip or spray evenly. Wipe with a clean cloth if desired. A second coat of stain may be applied within 30 minutes if more color is desired. Allow 1 hour before top coating with Aqua-Coat finish. All Aqua-Tone Stains may be intermixed to produce custom colors. Standard colors can be thinned with Aqua-Tone “Natural” Stain to produce lighter stains.